So as many of you may know I love to garden even though I am really terrible at it. I do try and try though. Some years are better than others. Now that I’m in my house it should be a whole lot easier to work on the garden instead of having to travel to it all the time. This summers crops were the worst I’ve ever had as it was the building of the houses that interfered. We had no water for a long time and had to transport water. Then when we had it I had to come water it every day by hand. Plants were only surviving. We had no electricity to turn on my drip system. It was just a whole mess though I tried and tried. In the end it fail despite all my efforts. The little that may have survived died because the gophers eat or killed the plants off. So a new season is about to start so I’m excited. I just have to prep the garden and then plant for this winters crops. When I garden it inspires me so much. It uplifts me. I think it’s a combination of hard work and the care I put into it. I also love life and the plants that bring on this new life. Seeing them start out so small and then grow into beautiful plants just brings me hope and keeps me working hard to achieve all this plant life. It’s also just peaceful to be around. I love just sitting there staring at the garden. I waste too much time just staring and thinking.

This brings me to how gardening inspires me at times when I design jewelry. When I’m in that uplifted state, I’m more receptive to ideas and there are many times nature itself will be incorporated into my designs. Many times it’s the beautiful curves and shapes that blend together that make up an ever so unique and powerful design for jewelry. I usually will incorporate these patterns and designs into my pendants and rings. The rings are usually wide so that they can fit these organic patterns. There is more room for me to fill the ideas that flow from my head. Not all of them translate into a great design, but the ideas start happening and I can then jot them down and test them. If it doesn’t work then I can play with it until I find something that does work. I have so many designs I have made in CAD but have never cast into metal. As with any small business owner might know, I can’t just come out with new designs every day. I need to work on many aspects of the business to make it all work together. I do wish I could just sit and create all day. That would be the best, but for now I to it all so time is limited. Even through all that I still am inspired to design and build custom designs all the time. If I didn’t then I don’t think I would keep progressing forward one step at a time. That is where passion comes in. I do all the other non inspiring parts of the business to look forward to do the fun inspiring, joyful and satisfying parts of the artistic side of the business.

sun and wheat patterns inspired by nature

So if you ever wondered how gardening can be an inspiration to make jewelry then well now you know. Gardening does not have to be what helps you make jewelry, but it could inspire you to do whatever you are passionate about. With new life comes new ideas. Try it some time. It does not disappoint!

The Raw Casting

After a ring is cast into metal it has this casting skin on it that prevents the metal from shining. Also the surface is semi smooth for smooth waxes and a little more rough for waxes that were not that smooth before casting. The color is also a little different. Just after casting the metal is a bit oxidized which means it’s black on the surface with a hint of the metal color mixed in. It needs to be “pickled” or put into some acid that will get rid of the black surface and make the metal a nicer color. For silver that is a dull white and for 14k yellow gold it’s a dull yellow. Now it’s ready to go to the cleanup process where the casting skin can be taken off.

Just after casting. The ring is now ready to go into the “pickle” or acid to get the black surface to a clean surface.

These silver castings have already been pickled to a dull white color. Some of them have been cut off the tree.

The cleanup process

Cleaning up the jewelry after casting can be a lot of work, but it’s rewarding. Bands are probably the easiest to clean up. Some engagement rings can be very difficult and time consuming. So let me explain the process so you can have a better idea. I’ll go through the general idea.

After a ring is cast the sprue has to be cut off which is where the metal was poured into the impression of the ring (see the image above). You do that by grinding it off until smooth with the rings surface. I usually will get it as close as I can, but not quite all the way. I can then use a finer grinder or even a file to help file it down. Then sand paper at various grits can be used to get the surface super smooth. This is the general idea. I’ll go over wedding bands and engagement rings in the next parts.

Sanding the sides of a ring after it had been blackened.

Wedding Bands

So wedding bands are usually simple and straight forward. Again, once cut off it has to be grind down so that it’s non existent. As you get close to the actual ring surface while grinding you have to slow down and take your time and use less aggressive methods. Then the whole ring has to be done in this way to get every surface clean and smooth as possible. Now it’s ready for polishing.

Silver rings that have been blackened and a light satin finish applied. Ready for polishing.

Engagement Rings

Engagement rings are sometimes a bit trickier to clean up. For these more difficult rings you need to used small files or even a small amount of sand paper wrapped around the tip of a mini file to smooth hard to reach areas. Also using a rubber wheel can help out a lot. This is attached to your flex shaft. It spins very fast and can speed things up if you are careful. Leaving it too long in one spot can dig into the surface and ruin it. So be careful and take your time. There are times you even need to use dental floss with polish on it to polish up hard to reach areas. Although there are some places you can’t get to there is a solution to at least brighten it up. Using a magnetic tumbler with tinny steel needle like pieces are used to tumble the ring and get those non accessible areas. Once the ring is cleaned up to the best of your ability and as smooth as it can be it’s ready for polishing.

Rendering of a platinum engagement ring I designed many years ago.

Conclusion

Cleanup after casting a ring is a very important process to go through. This will determine how much easier the next step of polishing will become. It makes the ring clean and free of blemishes and rough surfaces getting it ready for polishing. I have to say that I don’t think many people know what’s involved in getting a ring ready for final viewing. Usually it’s seen as a highly polished and perfect piece of jewelry, but it wasn’t always like that. It is quite the process that takes progressive steps along the way until its shine goes through. I hope this explanation helps a little bit to visualize the process and maybe think about the craftsmanship that goes into making a finished jewelry piece.

Audio Block

Double-click here to upload or link to a .mp3. Learn more