• Dana Arts
  • Collections
    • Animal Inspired
    • Beaded Jewelry
    • Bracelets
    • Celtic Inspired
    • Charms
    • Chokers
    • CTR Rings
    • Earrings
    • Engagement Rings
    • Faces
    • Flag Rings
    • Gold Bands
    • Greek Inspired
    • Hawaiian Inspired
    • Impressions of Nature
    • Laotion Inspired
    • Mission Rings
    • Necklaces
    • Pendants
    • Paradise
    • Patterned Bands
    • Steampunk Inspired
    • Custom
  • Photography
  • Crafts
  • Still
  • CAD
  • Details
    • Policies
    • FAQ
  • About
    • About Me
    • Contact
  • Blog
  • Pricing
  • Scheduling
  • Account/Login
Dana Arts

The Art of Handcrafted Art

  • Dana Arts
  • Collections
    • Animal Inspired
    • Beaded Jewelry
    • Bracelets
    • Celtic Inspired
    • Charms
    • Chokers
    • CTR Rings
    • Earrings
    • Engagement Rings
    • Faces
    • Flag Rings
    • Gold Bands
    • Greek Inspired
    • Hawaiian Inspired
    • Impressions of Nature
    • Laotion Inspired
    • Mission Rings
    • Necklaces
    • Pendants
    • Paradise
    • Patterned Bands
    • Steampunk Inspired
    • Custom
  • Photography
  • Crafts
  • Still
  • CAD
  • Details
    • Policies
    • FAQ
  • About
    • About Me
    • Contact
  • Blog
  • Pricing
  • Scheduling
  • Account/Login

Pendants

I love designing pendants because most of the ones I do are larger than rings and it allows more space for the design elements. Lately my favorite shape has been the round medallion pendant shapes. I have a few in the works and lots already done. I know they are big and heavy and not everyone likes that. I will try and design a few smaller and thinner ones in the future so that there is a pendant weight for everyone to choose from. My personal favorite is the “Paradise Pendant”. That’s the one I wear most often because it has to much significance to me. I like adding a thick leather cord to them because it is strong and will wear well with the pendants. Of course you can also put them on a thick silver chain, but they will wear out faster than the leather cord would.

Honey Run Bridge - Chico CA

Pendants can be so creative. There are so many shapes that can be used. For me I like to find what I feel is a cool shape in the moment and then start the design or idea for the middle. As I develop it I push and pull things around until I like it. I’m a very visual person so I usually can tell what will work and can see it in the metal as I design on paper or in CAD. Most of my design I start with and design totally in CAD. I think that’s funny because when I went to college I took many art classes. They always taught to design on paper first because you have more freedom to do anything you want. You mind can open up and be creative. That may be true, but for me I am able to be free even though I’m limited to the tools and my knowledge of the CAD program. I’ve used CAD for a long time and the tools are not really a hindrance anymore. If anything I can do things and be creative in ways I could not if I were to just use pen and paper. We all work different and have different skills and this is just how I’ve developed mine. I enjoy doing it in this way. I’ve also learned that I am not the best 2D artist. I love to draw and love to design on paper so don’t get me wrong. I just don’t feel I’m great at it even after all these years. I’m not a natural at it like some people. When I discovered CAD and started to learn sculpting in the computer, I fell in love. I’ve never sculpted clay other than making pots, but in CAD I love the ability to sculpt and save your file, then continue with it at any other time. I feel I’m a better 3D artist than a 2D one. It just makes more sense to me and 3D shapes are like real life so it comes easier to me. I’m still not perfect at it, but enjoy doing it.

So back to the pendants. This is why I design my pendants in CAD. The 3d environment make sense to me and it’s easier to do than draw my awkward 2D drawings. It’s interesting how we develop our skills though life. Everyone different with different paths. We do what works best for us and our families.

I hope yo enjoy my ideas coming to life in the form of pendants. I sure do. I get excited each time I’m able to spend some time building a new one. If you ever have a request for one let me know. I’d love to explore the idea and you will have had an influence on the design process. Thank you all those who actually follow me on social media or even read this blog. I doubt there are many, but everyone is important to me. As I try and grow my business please help out by sharing my posts with your friends. I just recently did a giveaway for a silver ring. I will be doing more in the future. Stay up to date and follow me on Instagram. @danaarts

tags: Designing, Designs, Pendants, silver pendants, medallions, dog tags, fashion jewelry, designer jewelry, detailed art, wearable art, casting, silver casting, Jewelry, Jewelry Design, danaarts, Dana Arts, Dana Arts Jewelry, Business, Growing, Growing my Business, Support, jewelry giveaway, jewelry and crafts, Medallions, leather cords, Leather necklaces, Sterling silver pendants, Fashion Pendants, Large pendants, designer pendants, small local business, The Garden House
categories: All Jewelry Related, Updates, New design
Friday 10.27.23
Posted by Dana Thorup
 

Jewelry Cleanup after Casting

The Raw Casting

After a ring is cast into metal it has this casting skin on it that prevents the metal from shining. Also the surface is semi smooth for smooth waxes and a little more rough for waxes that were not that smooth before casting. The color is also a little different. Just after casting the metal is a bit oxidized which means it’s black on the surface with a hint of the metal color mixed in. It needs to be “pickled” or put into some acid that will get rid of the black surface and make the metal a nicer color. For silver that is a dull white and for 14k yellow gold it’s a dull yellow. Now it’s ready to go to the cleanup process where the casting skin can be taken off.

Just after casting. The ring is now ready to go into the “pickle” or acid to get the black surface to a clean surface.

These silver castings have already been pickled to a dull white color. Some of them have been cut off the tree.

The cleanup process

Cleaning up the jewelry after casting can be a lot of work, but it’s rewarding. Bands are probably the easiest to clean up. Some engagement rings can be very difficult and time consuming. So let me explain the process so you can have a better idea. I’ll go through the general idea.

After a ring is cast the sprue has to be cut off which is where the metal was poured into the impression of the ring (see the image above). You do that by grinding it off until smooth with the rings surface. I usually will get it as close as I can, but not quite all the way. I can then use a finer grinder or even a file to help file it down. Then sand paper at various grits can be used to get the surface super smooth. This is the general idea. I’ll go over wedding bands and engagement rings in the next parts.

Sanding the sides of a ring after it had been blackened.

Wedding Bands

So wedding bands are usually simple and straight forward. Again, once cut off it has to be grind down so that it’s non existent. As you get close to the actual ring surface while grinding you have to slow down and take your time and use less aggressive methods. Then the whole ring has to be done in this way to get every surface clean and smooth as possible. Now it’s ready for polishing.

Silver rings that have been blackened and a light satin finish applied. Ready for polishing.

Engagement Rings

Engagement rings are sometimes a bit trickier to clean up. For these more difficult rings you need to used small files or even a small amount of sand paper wrapped around the tip of a mini file to smooth hard to reach areas. Also using a rubber wheel can help out a lot. This is attached to your flex shaft. It spins very fast and can speed things up if you are careful. Leaving it too long in one spot can dig into the surface and ruin it. So be careful and take your time. There are times you even need to use dental floss with polish on it to polish up hard to reach areas. Although there are some places you can’t get to there is a solution to at least brighten it up. Using a magnetic tumbler with tinny steel needle like pieces are used to tumble the ring and get those non accessible areas. Once the ring is cleaned up to the best of your ability and as smooth as it can be it’s ready for polishing.

Rendering of a platinum engagement ring I designed many years ago.

Conclusion

Cleanup after casting a ring is a very important process to go through. This will determine how much easier the next step of polishing will become. It makes the ring clean and free of blemishes and rough surfaces getting it ready for polishing. I have to say that I don’t think many people know what’s involved in getting a ring ready for final viewing. Usually it’s seen as a highly polished and perfect piece of jewelry, but it wasn’t always like that. It is quite the process that takes progressive steps along the way until its shine goes through. I hope this explanation helps a little bit to visualize the process and maybe think about the craftsmanship that goes into making a finished jewelry piece.

Audio Block
Double-click here to upload or link to a .mp3. Learn more
tags: Jewelry Cleanup, Jewelry Casting, engagement rings, Wedding Rings, wedding bands, Custom wedding bands, Custom wedding rings, How to make a ring, Ring making, danaarts, ring manufacturing, Dana Arts Jewelry, crafting rings
categories: All Jewelry Related, Crafts, Updates
Saturday 07.22.23
Posted by Dana Thorup
 

Bridal Show and Craft Fairs

So I’m always trying to improve. I am always pushing and pushing to grow my business and most of the time feels like I’m having fun even if it’s not really growing. As long as I’m enjoying the ride, I think that is what’s important.

So I’ve decided to try something new. For those that have never seen my art in person, now’s your chance. December 21st 2019 I will be in a 10 x 10 booth over at the Queen Creek Family Market. 21802 S Ellsworth Rd., Queen Creek, AZ 85142 which is outside the Queen Creek Library. Come and enjoy looking around and pass by if you’d like to see some of my rings and other crafts on display. It’s open from 9am to 2pm and it’s a Saturday.

I will have some new makeup bags or whatever you want to put in them bags available along with many other products. I so wish I had more time to make more, but I’ll bring what I can. :)

New Makeup Bags.

New Makeup Bags.


Also I will be going to a bridal show over in the Phoenix Convention Center. This will be January of 2020 on the 11th and 12th. I’m in booth #644. Come by if you’d like to see or try on some rings. It will be a fun time. Mark your calendars. I think it’s $12 to get in.

This is something new to me and I don’t have it all figured out yet. This is one way I’m pushing myself to grow. I could use your support if you will be around during those busy times of year. I’ll post about this again as it gets closer to the event, but I just wanted to get this out early on so you can plan for it. :)


Find me at Booth #644

Find me at Booth #644

tags: Arizona Bridal Show, Queen Creek Family Market, Dana Arts, Craft shows, Craft Fairs, Bridal Shows, Dana Arts Jewelry, Dana Arts rings, engagement rings, wedding bands, jewelry and crafts
categories: All Jewelry Related, Updates
Thursday 12.19.19
Posted by Dana Thorup
 

Dana Arts 2025